We arrived at this conclusion as our customer assisted us by spending additional time to:
– share photos of their home and ideal installation points
– run the Obstructions Test in the Starlink App and had a couple options for installation points where there were NO OBSTRUCTIONS
– share that they already received the Starlink STANDARD Installation Kit, purchased via Starlink.com
– share that they already received a Pivot Mount, purchased via Starlink.com
– share that they had measured the distance for the Starlink cable path from the outdoor to indoor installation points, and the 50 foot (49.2′ exactly) Starlink cable (proprietary Starlink cable) included in the Starlink STANDARD Installation Kit would be long enough.
– share that he had an existing cable path on which we could piggy-back the Starlink cable path (low-voltage data cabling path, not high-voltage electrical which could cause static degradation) with existing grommets, etc. we would just need to reseal the pass-through with silicon sealant/fire caulk. No new Cable Routing Kits needed.

INITIAL OFFSITE ASSESSMENT CONCLUSION: 
No Starlink SITE SURVEY PHASE Needed

Starlink Installation Kit – STANDARD (residential) model

Starlink STANDARD Installation Kit
Starlink STANDARD Installation Kit
(photo credit: Brian Westover) 

 

Starlink Installation Kit – STANDARD model
WHAT’S IN THE BOX?

Starlink Installation Kit - Starlink Standard - What's in the box

 

 

Starlink Standard Installation Kit & Pivot Mount - Installation Phase Inventory Review
Starlink Standard Installation Kit & Pivot Mount – Installation Phase Inventory Review


– ran an Obstructions Test on the Starlink App to confirm NO OBSTRUCTIONS at the installation point.

– completed the rooftop Pivot Mount installation.

 

Starlink Rooftop Installation in Wasilla AK
Starlink Rooftop Installation in Wasilla, AK
Starlink Installation Phase – rooftop install Wasilla AK
Starlink Installation - rooftop install Wasilla AK
Starlink Installation – rooftop installation Wasilla, AK
 
– awaited full Starlink synch (this can take up to 20 minutes once Starlink is installed) to ensure Starlink Alignment
 
Photo of (customer’s phone) Starlink App showing successful Starlink alignment in Wasilla, AK

 

Starlink App showing successful Starlink alignment in Wasilla AK
Starlink App showing successful Starlink alignment in Wasilla, AK

 

– verified with customer and
– ran Starlink Speed TestTEST OK – PASS!

Starlink Installation Phase Speed Test

 

Starlink Installation Speed Test Wasilla AK
Starlink Installation Speed Test Wasilla, AK

Starlink Installers in Alaska-AK:

Starlink Installation in Alaska-AK
Starlink Installers in Alaska-AK

 

Thank you.

 

Leave a Reply

Your email address will not be published. Required fields are marked *

Share via
Copy link